User Manual

ManualsBrandsYamaha ManualsSynthesizersS90XS/S70XS

Reference Manual

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Performance

Play

Mixing

Edit Select

Common Edit

Name

Play Mode

Arpeggio

Controller

Filter / EG

Effect

Parameter

A/D Out

A/D FX

Parameter

Part Edit

Voice

Play Mode

Arpeggio

Arp Edit

Arp 1-5 Type

Filter / EG

3 Band EQ

Rcv Sw

FX Send

Job Select

Recall

Bulk

Copy

Initialize

Supplementary Info.

Basic Structure

Appendix

Performance Edit

Performance Edit consists of the Common Edit parameters for editing the settings common to all Parts, and Part Edit

parameters for editing the individual Parts.

This section covers the Performance Edit parameters.

Common Edit

Common Edit lets you edit the parameters common to all Parts of the selected Performance.

Name (Performance Name)

Enter the desired name for the currently edited Performance. When you move the cursor to “Name,” pressing the

[ENTER] button calls up the Naming dialog, allowing you to enter the desired name. The name can contain up to 20

characters. Use the data dial and cursor buttons to select the desired character (in the lower section of the dialog) then

use the [INC] or [DEC] button to move the cursor (in the top line of the dialog) to the desired location. Repeat this

operation until the desired name is complete. After completing the name, press the [ENTER] button to actually enter the

name, or press the [EXIT] button to cancel naming and return to the original display.

Main Ctgry (Main Category)

Sub Ctgry (Sub Category)

Determines the Main Category and Sub Category of the Performance.

“Category” can be used as a keyword representing the characteristic of the Performance. The appropriate setting

makes it easy to find the desired Performance from a variety of Performances.

There are seven Main Categories which indicate types of music or sound type. There are up to twelve Sub Categories

for each Main Category, indicating more detailed types of instruments.

Settings: Refer to the Performance Category List on page 92.

Volume

Determines the output level of the entire Performance.

Settings: 0 – 127

Pan

Determines the stereo pan position of the Performance.

Settings: L63 (far left) – C (center) – R63 (far right)

NOTE: Note that this Pan parameter may have little or no audible effect if the Pan setting for a specific Part of the Voice is set to the left

position and the Pan for another Part is set to the right position.

Operation

[PERFORM]  Select Performance program  [EDIT]  Select the desired

display in the Performance Edit Select display  [ENTER]  Edit display

1 Name

2 Play Mode