User Manual

ManualsBrandsYamaha ManualsSynthesizersS90XS/S70XS

100

Reference Manual

Reference

Voice

Performance

Multi

SEQ Play

Master

Remote

File

Audio Rec/Play

Utility

Multi

Play

Mixing

Edit Select

Common Edit

Name

Arpeggio

Controller

Effect

Parameter

Master EQ

A/D Out

A/D FX

Parameter

Part Edit

Voice

Play Mode

Arpeggio

Arp Edit

Arp 1-5 Type

Filter/EG

3 Band EQ

Rcv Sw

FX Send

Job Select

Recall

Bulk

Copy

Initialize

Basic Structure

Appendix

Multi Edit

Multi Edit consists of the Common Edit parameters for editing the settings common to all Parts, and Part Edit parameters

by editing the individual Parts. Common Edit lets you edit the global settings common to all Parts, such as the Master

Effect, the Master EQ, and the Controller settings. Part Edit lets you adjust various parameters for each of 16 Parts

according to the corresponding tracks of the Song data.

This section covers the Multi Edit parameters.

Common Edit

Common Edit lets you edit the parameters common to all Parts of the selected Multi.

Name (Multi Name)

Enter the desired name for the currently edited Multi. When you move the cursor to “Name,” pressing the [ENTER]

button calls up the Naming dialog, allowing you to enter the desired name. The name can contain up to 20 characters.

Use the data dial and cursor buttons to select the desired character (in the lower section of the dialog) then use the

[INC] or [DEC] button to move the cursor (in the top line of the dialog) to the desired location. Repeat this operation until

the desired name is complete. After completing the name, press the [ENTER] button to actually enter the name, or press

the [EXIT] button to cancel naming and return to the original display.

Determines whether the item being edited will commonly affect all five Arpeggios assigned to each Voice (“Arp Edit”), or

affect only the selected Arpeggio (“Arp 1 – 5 Type”).

Arp Common Sw (Arpeggio Common Switch)

Determines whether Arpeggio is on or off. You can also turn the Arpeggio Switch on/off from the front panel with the

[ARP ON/OFF] button.

Settings: off, on

Arp 1 – 5 Select (Arpeggio 1 – 5 Select)

Select one of “ARP1” – “ARP5.” The 8th note icon shown in the settings indicates that one of the Arpeggio Types (other

than “off”) is selected for the Arpeggio. When the Arpeggio/Effect Function is set to “ARP SELECT,” you can select Arp

1 – 5 via the Function buttons.

Settings: Arp 1 – Arp 5

Operation

[MULTI]  Select Multi program  [EDIT]  Select the Common display in the

Multi Edit Select display  [ENTER]  Edit display

1 Name

2 Arpeggio