User Manual
Table Of Contents
12
브릿지/스프링 장력 조절
좋은 결과를 얻으려면 아래 그림과 같이 브릿지가 기타 상부와 평행
하도록 조절하는 것입니다. 이 위치는 줄과 갈고리형 스프링 사이의
압력을 대치시켜 유지됩니다. 줄 길이를 변경하려면 스프링 장력을
다시 조절하여 브릿지를 평행 위치로 변경해야 합니다.
조절 절차는 다음과 같습니다.
1) 갈고리형 스프링이 보이는 기타 뒷판에서 트레몰로 장치 뒷판을
부착하는 나사를 제거하십시오.
2) 기타가 올바른 음으로 조율되었는지 확인하십시오.
3) 브릿지가 위로 기울어졌으면 갈고리형 나사를 시계 방향으로 돌려
스프링 장력을 조이십시오. 브릿지가 아래로 기울어졌으면 갈고리
형 나사를 시계 반대 방향으로 돌려 스프링 장력을 풀어주십시오.
(그림 - A)
스프링 장력을 각각 조절한 후 줄 음을 확인하십시오.
A
두 개의 나사
A
를 사용하여 높이를 균
등하게 조절하십시오.
A
10_EG_om_hu_0126.indd 12 16/01/27 20:07