User Manual

Panel controls
CK88 CK61 Owner’s Manual
19
8 MIDI terminals
With a standard MIDI cable (commercially available),
you can connect an external MIDI instrument, and
control it from the CK. Likewise, you can use an
external MIDI device (such as a keyboard or sequencer)
to control the internal tone generator on the CK.
9 USB [TO DEVICE] terminal
For connecting a USB flash drive to the CK, allowing
you to save a Live Set Sound you have stored, load a
Live Set Sound back to the CK, or play audio files.
NOTE
Only a USB flash drive can be connected to the USB [TO DEVICE]
jack. No other USB devices such as a hard disk drive, CD-ROM
drive, or USB hub can be used.
You cannot record your performance onto a USB flash drive.
) USB [TO HOST] terminal
For connecting the CK to a computer, iPhone, or iPad
via a USB cable for using the MIDI and audio capability.
With the USB [TO HOST] terminal, two MIDI ports
(page 48) can be used simultaneously.
NOTE
The USB [TO HOST| terminal has the capacity for handing two mono
channels (or one stereo channel) of 24-bit audio at a sampling rate of
44.1 kHz.
! [PHONES] jack
For connecting a 6.3-mm standard stereo phone jack
to connect headphones.
When the Speaker Mute is set to Auto, the built-in
speakers will be muted when the headphones are
connected.
CAUTION
To prevent hearing loss, avoid using headphones at high
volumes for extended periods of time.
Whenever connecting external audio devices, ensure that
all devices are turned off.
NOTE
The sound output via the headphones is identical to that output via
the OUTPUT jacks. The sound is output via OUTPUT jacks regardless
of whether or not the headphones are connected.
The [PHONES] jack on the CK88 can be found on the
front side.
For CK88
7 8 9 )
!
USB flash drive
MIDI device
Computer
Headphones
Headphones