User Manual

Advanced settings
CK88 CK61 Owner’s Manual
30
Part A
Part B
Part C
Touch
Sensitivity
Offset
Determines the amount by which played velocities are adjusted for the actual
resulting velocity effect. This lets you raise or lower all velocities based on this
setting value—allowing you to automatically compensate for playing too
strongly or too softly. However, because of automatic compensation, the value
will be set to 1 when the result is smaller than 1, and the value will be set to
127 when the result is larger than 127.
Settings:
0–127
Common Transpose
Changes the pitch up or down in semitones.
Settings:
−12–+12
Default: +0
NOTE
This setting does not affect MIDI output messages.
Layer/Split Mode
Selects the combination of Layer and Split.
You can also use the [SPLIT] button for this setting.
Settings:
ABC, A/BC, AB/C, A/B/C
Default: ABC
Split Point
Sets the Split Point or the lowest note on the right keyboard range using a
note name.
When using the split mode A/B/C, two Split Points are needed.
You can also use the [SPLIT] button to set the split point.
Settings:
C#-2–G8
Default: G2
C3 is MIDI note number 60.
Live Set EQ Mode SW
Turns the Live Set EQ Mode on/off.
Default:
Off
EQ Settings
Sets the EQ for the Live Set Sound.
High Gain
Sets the gain for the high band.
Settings:
−12 dB–0–+12 dB
High Frequency
Sets the frequency for the high band.
Settings:
500 Hz–16 kHz
Function name Description
127
012764
127
64
127
0
12764
127
0
When Depth = 64
and Offset = 32
Actual resulting
velocity (affecting
the tone generator)
Velocity with which you play a note
Actual resulting
velocity (affecting
the tone generator)
Velocity with which you play a note
Actual resulting
velocity (affecting
the tone generator)
Velocity with which you play a note
When Depth = 64
and Offset = 64
When Depth = 64
and Offset = 96