User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Advanced settings
CK88 CK61 Owner’s Manual
37
MIDI MIDI Port MIDI
Determines whether to use the MIDI terminals for transmitting or receiving MIDI
messages with the internal tone generator.
• On: Used as Port 1 (transmit or receive MIDI messages with the internal tone
generator).
• O: Used as Port 2 (USB-MIDI interface).
In this case, MIDI messages received by the MIDI [IN] terminal are sent to USB Port 2
(MIDI OUT 2). MIDI messages received by the USB Port 2 (MIDI IN 2) are sent to the
MIDI [OUT] terminal.
Default:
On
USB
Determines whether to use (On) the USB [TO HOST] terminal for transmission/
reception of MIDI messages, or not (Off).
Default:
On
MIDI
Channel
Transmit
Determines the MIDI transmit channel. When this is set to Off, MIDI messages are not
transmitted.
Settings:
1–16, Off
Default: 1
Receive
Determines the MIDI receive channel. When this is set to All, MIDI messages will be
received over all channels.
Settings:
1–16, All
Default: 1
MIDI Control
Sets the MIDI control message to be sent out when using knobs and sliders on the front
panel. For MIDI Control, the keyboard, Pitch Bend, Modulation, and pedals are excluded.
• On: MIDI messages are transmitted when the corresponding controllers such as
knobs and sliders are used, allowing you to use a DAW and external MIDI devices to
receive and record the operation information.
• Off: MIDI messages are not transmitted when the corresponding controllers are used.
Default:
Off
NOTE
• When MIDI messages corresponding to knobs and sliders are received from the DAW, the settings
for those knobs and sliders are changed.
• The MIDI message assignment for each knob or the slider is fixed. If you want to control the
parameters in the DAW from the knobs and sliders on the CK, set up the computer to receive
messages from the knobs and sliders. For details on MIDI messages, see page 54.
Local Control
Determines whether Local Control is on or off.
When this is set to Off, the CK’s tone generator is disconnected from the keyboard, and
no sound will be produced when the keyboard is played. However, regardless of the
setting here, performance information from the CK’s keyboard is transmitted as MIDI
messages, and the CK’s tone generator will continue to produce sound in response to
the MIDI messages received from MIDI input, depending on the MIDI settings.
Default:
On
Controller Reset
Determines whether to keep (Hold) or initialize (Reset) the values of controllers (such as
Modulation wheel and Foot Controller) when switching to a different Live Set Sound.
When this is set to Reset, the controllers are reset to the default as shown below when
switching to a different Live Set Sound.
•Pitch Bend: Center
•Modulation: Minimum
• Expression: Maximum
• Pedal Wah: Minimum
Default:
Reset
Function name Description