User Manual

Setup
21
DTX402K DTX432K DTX452K Owner’s Manual
Setting Up for Sound
1. Ensure that your drum module is turned off (i.e., none
of the buttons are lit).
2. Insert the AC adaptor’s DC plug into the
[ ] connector on the bottom panel of
the module.
3. Hook the AC adaptor cord around the cord clip to pre-
vent it from being accidentally pulled out.
4. Plug the adaptor’s AC power cord into an AC wall
socket or another electrical outlet.
Your drum module does not have built-in speakers. In order
to hear it, therefore, you will need to connect headphones or
monitor speakers via the [PHONES/OUTPUT] standard
stereo-audio jack. You can adjust the output volume using
the [VOLUME] buttons on the control panel.
You can connect a portable music player or another similar
source of audio to your drum module via the [AUX IN]
(auxiliary input) stereo mini-jack. This makes it possible
to play along with your favorite tunes.
Connecting the Power
CAUTION
Excessive bending can damage the AC adaptor cord
and create a fire hazard. Ensure, therefore, that the
power cord is not bent at an extreme angle when
wrapped around the clip.
WARNING
• Use the specified AC adaptor (page 64) only. Using
the wrong AC adaptor can result in damage to the
instrument or overheating.
• When using the AC adaptor with a removable plug,
make sure to keep the plug attached to the AC adap-
tor. Using the plug alone can cause electric shock or
fire.
• Never touch the metallic section when attaching the
plug. To avoid electric shock, short circuit or dam-
age, also be careful that there is no dust between the
AC adaptor and plug.
Cord clip AC adaptor cord
Slide the plug as
indicated
Plug
The shape of the plug
differs depending on
your area.
Connecting Headphones or Speakers
The [PHONES/OUTPUT] jack is a stereo connector. You can con-
nect a 1/4" mono-audio jack to it, but in such a case, please be
sure to set the output to mono using the Stereo/Mono parameter
from Menu Mode (page 55).
CAUTION
To prevent hearing loss, avoid using headphones at a
high volume for extended periods of time.
Connecting a Music Player
• Whenever connecting other devices, ensure that the cables you
use have plugs that match the input or output connectors on
those devices.
• Before making connections, furthermore, you should also turn
the volume on the other devices fully down.
• When all connections have been made, use each device’s vol-
ume controller to balance its output with that of the drum mod-
ule.
NOTE
NOTICE
1/8" stereo-mini
to stereo-mini
cable
Portable music player,
etc.
Standard 1/4"
mono-audio jack
Powered speakers
or
Standard 1/4"
stereo-audio
jack
Headphones