User Manual

Basic Techniques
Customizing the Metronome
36
DTX502 Owner’s Manual
On the CLK5 page, you can tune the sounds for each of the metronome subdivisions (i.e., “ A˘ ”,
“ ¤ ”, “ ‹ ”, “ ßß ”, and “ Œ ”).
1.
Hold down the [SHIFT] button and press the [ ] button
to access the Metronome area.
2.
Navigate to the CLK5 page using the [<]/[>] buttons.
3.
Move the cursor to the subdivision symbol to the right
of “Sound=” (i.e., “ A˘ ”, “ ¤ ”, “ ‹ ”, “ ßß ”, or “ Œ ”),
and turn the Data Dial to select the one to set.
4.
Move the cursor to the number to the right of “Tune=”,
and turn the Data Dial to change the tuning.
Metronome subdivision sounds can be tuned between -24.0 and +24.0 semitones.
On the CLK6 page, you can use the Tap Tempo function to set the tempo by striking pads.
1.
Hold down the [SHIFT] button and press the [ ] button
to access the Metronome area.
2.
Navigate to the CLK6 page using the [<]/[>] buttons.
3.
Strike a pad at least three times at the desired tempo.
The tapped tempo will be displayed on-screen.
CLK5
Tuning Click-Set Sounds
CLK6
Tapping the Tempo on the Pads
CLK5* Sound=A˘
” tune=+ 0.0 ‚
CLK6* tAP tEMPO
” ⁄=120