User Manual

Technical Data Sheet

1 / 4

I/O Rack RMio64-D

Overview

The RMio64-D Dante/MADI conversion I/O rack supports a wide range

of broadcast and live sound applications with extraordinary ﬂexibility.

Features

• 1U size

• Transfer up to 64 digital inputs and 64 digital outputs between a Dante network and a MADI-compatible device

• Built-in sample rate converters on inputs and outputs

• Supports Dante redundancy

• Redundant MADI connections can be made via optical and coaxial cables

• MADI signals received via an optical (coaxial) input that can be retransmitted via a coaxial (optical) output

• Mounting, Dante patching, and SRC settings can all be remotely controlled from a CL or QL series console

• The Yamaha Nuage system offers Direct Monitoring functionality for recording, precision VST System Link synchronization

• Supports remote controllability via Nuage Workgroup Manager system management software

Rear Panel

PAGE 1
I/O Rack RMio64 -D Overview The RMio64-D Dante/MADI conversion I/O rack supports a wide range of broadcast and live sound applications with extraordinary flexibility.
PAGE 2
I/O Rack RMio64 -D Specifications General Specifications Internal Sampling Frequency External 44.1kHz 48kHz 88.2kHz 96kHz 176.4kHz 192kHz +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm +4.1667%/+0.1%/-0.1%/-4.0% ±50ppm Terminals Format Data length Level Connector Primary/Secondary Dante 24bit 1000Base-T EtherCON x 2 ECL BNC Connector -31 – -14dBm SC Connector 44.
PAGE 3
I/O Rack RMio64 -D Dimensions Unit: mm (inch) Software • R Remote Technical Data Sheet 3/4
PAGE 4
I/O Rack RMio64 -D Architectural and Engineering Specifications The Yamaha RMio64-D shall be a 1U-size Dante/MADI format converting I/O rack that can handle up to 64 inputs and 64 outputs for broadcast, live sound, and other applications. The MADI inputs and outputs shall include built-in sample rate conversion so that MADI and Dante signals can be handled without having to change the clock settings for each.