User Manual

Technical Data Sheet
2 / 4
I/O Rack RSio64-D
Specifications
General Specifications
Sampling
Frequency
External Clock
Frequency
Range
44.1 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
48 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
88.2 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
96 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm
Signal Delay
SLOT IN (MY8-AE96) to SLOT OUT (MY8-
AE96) (@ fs=96 kHz, SRC off, Internal routing)
Less than 0.2 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=48 kHz, through Dante, SRC off) (Dante
Receive Latency set to 0.25 ms)
Less than 0.8 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC off) (Dante
Receive Latency set to 0.25 ms)
Less than 0.5 ms
SLOT IN (MY8-AE96) to Rio3224-D AES OUT
(@ fs=96 kHz, through Dante, SRC on, SLOT
fs=48 kHz) (Dante Receive Latency set to
0.25 ms)
Less than 1.1 ms
SRC
SRC Lock Range: 39.7 kHz – 101.7 kHz
Sample Rate Ratio Limit: 1:2.6 to 2.6:1
Dimensions (W x H x D)
480mm x 88mm x 365 mm (18.9" x 3.5" x 14.37")
Net Weight
6.1 kg (13.4lbs)
Power Requirements
(wattage)
60 W
Power Requirements
(voltage and hertz)
100-240 V 50/60 Hz
Temperature Range
Operating temperature range: 0 – 40 °C
Storage temperature range: -20 – 60 °C
Included Accessories
Owner’s Manual, AC power cord
Digital I/O Characteristics
Terminal Format Data Length Level Audio I/O Connector
Primary/
Secondary
Dante
24 bit or
32 bit
1000 BASE-T
64 ch Input/64 ch Output@48 kHz
32 ch Input/32 ch Output@96 kHz
etherCON
CAT5e
Control I/O Characteristics
Terminal Format Level Connector
WORD CLOCK IN — TTL/75 Ω terminated BNC
External DC Input Characteristics
Terminal Format Level Connector
EXT DC INPUT
*1
— — XLR-4-32 type
*2
*1 Power Requirements: +24V±2V, 3A
*2 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V