User Manual
◦
Input Ch Mute Group
◦
ZONE Out Mute Group
◦ [Parameter1]
Specify the channel that will control the on/off setting of the parameter.
◦ [Output Type]
Specifies how output will occur from the [GPI OUT] connector.
You can choose [Closed],[Open],[Pulse],[Puse Inv.] or [Falling Edge].
•
[MTX Send On]
Send on/off operations will control the GPI Output.
Select one of the following parameter types, and then make the appropriate setting.
◦
Input Ch Send ON
◦
Fx RTN Send ON
•
[MTX Priority Ducker ON]
On/off operations of the zone’s Ducker will control the GPI Output.
Select one of the following parameter types, and then make the appropriate setting.
◦
1st Priority
◦
2nd Priority
•
[MTX Dugan Automixer]
Parameter on/off operations will control the GPI Output.
Select one of the following parameter types, and then make the appropriate setting.
◦
Override(master)
◦
Mute(master)
◦
override(Ch)
◦ [Parameter1]
For Override (master) and Mute (master), select the group that controls on/off. For override (Ch),
select the channel that controls on/off.
◦ [Output Type]
Specifies how output will occur from the [GPI OUT] connector.
•
[SD Song Play]
The status of audio file playback will be output to the [GPI OUT] connector.
◦ [Output Type]
Specifies how output will occur from the [GPI OUT] connector.
•
[MTX Level]
Controls the GPI Output according to the level (volume changes) of each channel. You can use this to
fader-start a CD player, or to light an indicator when high volume occurs.
Select one of the following parameter types, and then make the appropriate setting.
◦
Input Ch Level
◦
Fx RTN Level
◦
Matrix Out Level
◦
ZONE Out Level
◦
Output Ch Level
◦
1st Priority Mix Level
◦
2nd Priority Mix Level
◦
Input Ch DCA Group
14. Audio Processors : MTX5-D/MTX3
198 | ProVisionaire Design User Guide