User Manual

14.7.8. “Sampling Rate Converter” dialog box
Click to open "Sample Rate Converter" in the context menu of the "Slot In" or "Slot Out" component editor.
Here you can turn on/off the SRC (Sampling Rate Converter) of the MY4-AEC or MY8-AE96S that is installed in
the device’s slot, and specify the word clock setting of the output.
•
[ON] button
Switches the SRC on/off. The button also shows the on/off status.
•
[Fs Type] box (MY4-AEC only)
This selects the word clock that will be output from the MY4-AEC when SRC is on.
If you select AES/EBU_IN_CH1/2, the word clock that is received at input 1/2 of the MY4-AEC will be
output. If you select AES/EBU_IN_CH3/4, the word clock that is received at input 3/4 of the MY4-AEC will
be output.
•
[OK] button
Applies the settings and closes the dialog box.
•
[Cancel] button
Closes the dialog box without applying the settings.
14. Audio Processors : MTX5-D/MTX3
208 | ProVisionaire Design User Guide