User Manual
Table Of Contents
- ■ Precautions (Please be sure to read this section first!)
- ■ Checking the version number
- ■ Preparing for the update
- ■ Update procedure sequence
- ■ Decompressing the downloaded file
- ■ Install the MTX-MRX Editor
- ■ Install the Dante Firmware Update Manager (for Dante)
- ■ Computer TCP/IP setting (for Dante)
- ■ Updating the Dante firmware
- ■ Computer TCP/IP setting ( for device main)
- ■ Updating the device main firmware
- ■ About Failsafe Mode
2
■ Checking the version number
・ You may check the firmware version of the device itself from the "Device Information" dialog box of
MTX-MRX Editor, or by using the Dante Controller software from Audinate Corporation.
”Device Information” dialog box
Dante Controller (Device View)
・ You may check the Dante firmware version from the "Dante Information" dialog box of MTX-MRX
Editor, or by using the Dante Controller software from Audinate Corporation.
”Dante Information” dialog box
Dante Controller (Device View)