User Manual

Assembly Guide
13
Setup
DTX402K DTX432K DTX452K Owner’s Manual
Standing up the Large rack
1. Stand up the Large rack with the rear of the tom pads facing towards you as shown in the figure.
2. Loosen the  key bolt using the drum key.
3. Pull the shorter leg towards you.
Standing up the Small rack
1. Stand up the Small rack as shown in the figure and support it by hand.
2. Loosen the  key bolt.
3. Open the lower pipe approximately 70° as shown in the Top view.
For the DTX452K, the snare pad will be attached to the Small rack in the following step.
Step 1
Rack (Large)
To ms
Step 2
Rack (Small)
70°
Top view