User Manual

Performing with a Selected Music Category

Basic Techniques

DTX402K DTX432K DTX452K Owner’s Manual

1. Press the Mode switch to turn the “PLAY” light on.

2. Select a music category by pressing the corresponding

number button [1] to [10].

The selected number button will light up and the corre-

sponding song will be automatically selected.

3. Press the [ ] button to start the song.

4. Play the pads with the song.

5. To stop the song, press the [ ] button once again.

While holding the [] button, press either the VOL-

UME[+] or VOLUME[–] button.

• Each time you press the VOLUME[+] button, you

increase the song volume by one.

• Each time you press the VOLUME[–] button, you

decrease the song volume by one.

Performing with a Song

The score (PDF) is available at the Yamaha website:

https://download.yamaha.com/

After accessing the Support website (and clicking on “Man-

ual Library”), enter the appropriate model name.

If you wish to mute the programmed drum parts and hear

only the song parts, press the [DRUM ON/OFF] button. To

unmute the drum parts, press the [DRUM ON/OFF] button

once again.

NOTE

Adjusting the Song Volume

The set volume is common to the drum module’s ten songs.

Hold

Higher song

volume

Lower song

volume

NOTE