User Manual

Practicing in Training Mode
40
Basic Techniques
DTX402K DTX432K DTX452K Owner’s Manual
10. RECORDER
1. Press the Mode switch to turn the “TRAINING” light
on.
2. Press number button [10] to select Recorder.
The [ ] button flashes, indicating that recording is
set to standby.
3. Play the pad, and the recording starts automatically.
4. When you finish your performance, leave all pads with-
out striking for certain period of time.
The recording will be automatically stopped and the
recorded performance will be played back.
5. To end the exercise, press the Mode switch.
Recording your play:
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
10. RECORDER
Recorder allows you to easily record your performances. You can
use those recordings not only for listening back and checking your
progress, but also for playing along with yourself! Keep in mind
that this training is not scored.
When the “TRAINING” light is ON, press the Mode switch to
turn on the “PLAY” button, and then press the Mode switch
again to turn on the “TRAINING” light.
Procedure
NOTE
TIPS
• You can record your performance along with a
song. (Press the [ ] button while recording is
set to standby.)
• You can listen to the metronome click while record-
ing your performance. (Press the [] button while
recording is set to standby.)
• You can stop the playback of the recording by
pressing any number button. If you press any
number button again, the recording will be played
back from the beginning.
• The recorded performance is deleted when you exit
from the Training Mode.
• The beat setting for recording is “4 beats,” and can-
not be changed.