User Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
83
 [GPI] tab (ACD1 only)
Calibrates the input voltage detection range for the device’s [GPI] connector.
 [All Ports] check box
Selects the check boxes of all ports.
 Port check boxes
Specifies the selected ports as the target of calibration.
 Calibration data
Indicates the input voltage in realtime.
 [Reset] button
Resets the calibration of the selected port(s).
 [Max] button
Sets the current input voltage of the selected port(s) as the maximum value. The specified maximum value is
shown as a red marker.
 [Min] button
Sets the current input voltage of the selected port(s) as the minimum value. The specified minimum value is
shown as a blue marker.
Port check boxes
Setting the maximum
input voltage
Setting the minimum input voltage Calibration data