User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Advanced settings
CK88 CK61 Owner’s Manual
31
Controllers
Common Live Set EQ EQ
Settings
Mid Gain
Sets the gain for the mid-band.
Settings:
−12 dB–0–+12 dB
Mid Frequency
Sets the frequency for the mid-band.
Settings:
100 Hz–10 kHz
Low Gain
Sets the gain for the low band.
Settings:
−12 dB–0–+12 dB
Low Frequency
Sets the frequency for the low band.
Settings:
32 Hz–2.0 kHz
Tempo Delay Time
When Tempo Delay is selected for Delay, this sets the delay time in note lengths
to match the tempo.
Settings:
1/32 Tri.–1/2
Default: 1/4
NOTE
The tempo should be set with the [TIME] knob or with Tap Tempo using the [ENTER]
button.
Function name Description
Pitch Bend Range Part A
Determines the pitch bend range in semitones.
Settings:
−24–+0–+24
Default: +2
Part B
Part C
Mod Wheel Assign
Determines the function to be assigned to the Modulation wheel.
You can assign the Modulation wheel to Control Change numbers 1 to 119 or the
USB Audio volume.
Settings:
Off, 1–119, USB Audio Volume
Default: 1 (Modulation)
Foot Pedal 1
Foot Pedal 2
Assign
Determines the Control Change number to be assigned to a pedal connected to
the FOOT PEDAL jack.
You can assign each Foot Pedal to Control Change numbers 1 to 119, or to control
the USB Audio volume.
Settings:
Off, 1–119, USB Audio Volume
Default:
Foot Pedal 1: 64 (Sustain)
Foot Pedal 2: 11 (Expression)
Limit Low
Determines the lowest value for the foot controller (FC7) connected to the FOOT
PEDAL jack.
Settings:
0–127
Default: 0
Limit High
Determines the highest value for the foot controller (FC7) connected to the FOOT
PEDAL jack.
Settings:
0–127
Default: 127
Receive SW Expression Part A
Part B
Part C
Determines whether each Part receives (On) or ignores (Off) the corresponding
MIDI messages received from external devices or the messages generated by
operating the footswitch or foot controller.
Default:
On
Sustain
Sostenuto
Soft
Function name Description