User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Welcome
- Accessories
- Contents
- About the CK88 and CK61
- Panel controls
- Setting up
- Basic operations
- Other Live Set Sound features
- Managing Live Set Sounds
- Advanced settings
- Using with External Devices
- Precautions when using the USB [TO HOST] terminal
- Using Smart Devices
- Connecting to a computer
- Controlling a synthesizer or tone generator module from the CK
- Controlling the CK from an external keyboard
- Setting the MIDI transmit and receive channels
- Disabling the internal tone generator sound when the built-in keyboard is played
- Setting how the MIDI terminals are used (MIDI Port settings)
- Data List
- Other information
Other information
CK88 CK61 Owner’s Manual
68
Display messages
Messages Description
Auto power off disabled.
This message appears when Auto Power Off is disabled.
Bluetooth pairing...Press [EXIT] button to
cancel pairing.
The Bluetooth device and the CK are being paired. Press the [EXIT] button to cancel pairing.
Change [Pedal Live Set Inc/Dec] to [Off].
Before changing the foot pedal assignment from the [SETTINGS] button, you need to set
the Live Set Inc/Dec parameter to off from the [MENU] button.
Completed.
The specified operation (Load, Save, Format or another Job) has been completed.
Connect a USB device.
There is no connected USB device.
Connecting to USB device…
Currently recognizing the USB flash drive connected to the USB [TO DEVICE] terminal.
Device number is off.
Bulk data cannot be transmitted or received because the device number is off.
Device number mismatch.
Bulk data cannot be received because the device numbers do not match.
File or folder already exists.
A file or a folder having the same name as the one you are about to save already exists.
File or folder path is too long.
The file or folder cannot be accessed because the maximum length for the file name or the
pathname has been exceeded.
Illegal bulk data.
An error occurred while receiving a Bulk data or Bulk Request message.
Illegal file name.
The specified file name is invalid. Try entering a different name.
Illegal file.
The specified file is unusable by the CK or cannot be loaded.
Incompatible USB device.
A USB device that cannot be used with the CK has been connected to the USB [TO DEVICE]
terminal.
Low Battery!
The batteries are low. Replace the batteries.
MIDI buffer full.
Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error.
An error occurred when receiving bulk data.
No read/write authority to the file.
Indicates that you do not have the authority to read or write to the file.
Now receiving MIDI bulk data…
Indicates the CK is receiving MIDI bulk data.
Now transmitting MIDI bulk data…
Indicates the CK is transmitting MIDI bulk data.
Please reboot to maintain internal
memory.
Reboot the CK to restore the internal memory.
Press both [ENTER]+[MENU] buttons.
Press the [ENTER] button and the [MENU] button simultaneously to disable the panel lock.
Speaker EQ is set to [Table].
Speaker EQ has been set to Tab le .
Split Point does not exist.
Cannot change the Split Point because it has not been set.
Unsupported USB device.
This message appears when the connected USB flash drive is either unformatted, or
formatted in a way that the CK does not support. Please format the USB flash drive using
the CK.
USB connection terminated.
Communication with the USB flash drive has been shut down due to overcurrent to the USB
flash drive. Disconnect the USB flash drive from the USB [TO DEVICE] terminal, and then
reboot the CK.
USB device is full.
The USB flash drive is full and no more data can be saved. Use a new USB flash drive, or
make space by erasing unwanted data from the USB flash drive.
USB device is write-protected.
This message appears when you have attempted to write to a protected USB flash drive.
USB device read/write error.
An error occurred while reading from or writing to a USB flash drive.