User Manual
Table Of Contents
- Contents
- Support for Shure AXT400, QLXD4 and ULXD4
- Selected Channel section (QL series only)
- Input and output patching
- Input/Output channels
- EQ and Dynamics
- Meters
- I/O devices and external head amps
- Setup
- CL/QL Editor V4.1 Supplementary Manual
- Reading and Writing CSV files
- Support for devices that do not feature Dante output
Meters
V4.1 Supplementary Manual
16
Meters
Added functions in the RTA display window (RTA
METER window, HPF/EQ window, GEQ window,
8BandPEQ window)
The visibility of frequency analysis displays has been improved with the addition of a scale
change and offset gain, and the addition of PEAK HOLD.
1 Offset gain (RTA METER window, HPF/EQ window, GEQ window, 8BandPEQ
window)
If a frequency is at a low level, its analysis results might not appear clearly in a graph.
The addition of offset gain allows better visibility in graphs for such results. You can
adjust this gain from 0dB to +30dB.
NOTE
The value for this parameter is applied identically to the RTA METER window, HPF/EQ window,
GEQ window, and 8BandPEQ window.
2 Scale change (RTA METER window)
The RTA scale has been changed to display regular intervals in dB.
3 PEAK HOLD button (RTA METER window)
Turn on this button to hold the peak level indication on graphs of frequency analysis.
Turn off this button to clear the peak hold indication.
NOTE
The settings for the PEAD HOLD button, RTA button, and offset gain are stored even when the
console is turned off.
2
3
1
1
1
1