User Manual

16
Owner’s Manual
Specifying the audio routing
Specifying the
audio routing
The RSio64-D provides seven preset patterns of audio
routing that connect each slot to the Dante network. There
is also one user pattern (page 17) which the user can edit.
Use the front panel ROUTING
[PATTERN] rotary switch to select the
routing.
Setting the rotary switch to 1–7 selects
preset routing patterns 1–7, and setting
it to 0 selects the user routing pattern.
The preset routing patterns are described below.
 PATTERN 1
Dante is connected one-to-one with each slot’s input/
output.
 PATTERN 2
The inputs of slot 1 are distributed to the outputs of
slots 2–4.
 PATTERN 3
The inputs of slot 1 are distributed to the outputs of slot
2, and the inputs of slot 3 are distributed to the outputs
of slot 4.
 PATTERN 4
The inputs and outputs of Slots 1 and 2, and Slots 3 and
4 are interconnected.
 PATTERN 5
Dante inputs 1–16* are distributed to the outputs of
each slot.
 PATTERN 6
Dante inputs 1–16* are distributed to the outputs of
slots 1 and 2, and Dante inputs 17–32* are distributed
to the outputs of slots 3 and 4.
 PATTERN 7
Dante 1–32* and slots 1–2 are connected one-to-one,
and the inputs and outputs of slots 3 and 4 are
connected respectively to each other.
*At 48/44.1 kHz
NOTE
• If the inputs/outputs of an installed Mini-YGDAI card cannot
be assigned in 16-channel units, such as for a 4-channel or
a 8-channel card, audio routing signals from such card are
muted by the slot (e.g., if the Mini-YGDAI card is an 8-
channel card, channels 9–16 are muted).
• For different sampling frequencies, the channels of the
routing pattern are switched automatically, as shown above.
However if SRC is on, the number of the slot’s channels may
change, so there may be cases in which you are unable to
use the above patterns as you would like. In such cases, use
the user pattern.
For example when the sampling frequency is 88.2/96 kHz,
Dante channels 1–8, 9–16, 17–24, and 25-32 are available,
but if SRC is on
for SLOT 1, and the sampling frequency of
that slot is 44.1/48 kHz, then channels 1–16 are available for
SLOT 1.
Making the setting
You can select the routing pattern even when the power
is on. Your selection is applied three seconds after you
switch the routing pattern.
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante
1-16
1-8
48k/44.1k
96k/88.2k 1-8 1-8 1-8
1-16 1-16 1-16
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1-16
1-8
48k/44.1k
96k/88.2k 9-16 17-24 25-32
17-32 33-48 49-64
Dante