User Manual

ManualsBrandsYamaha ManualsMixing TablesDIGITAL MIXER

Table Of Contents

Specification additions/changes for Yamaha CL5/CL3/CL1 V1.02

Specification additions/changes for Yamaha CL5/CL3/CL1 V1.02

Thank you for choosing a Yamaha CL series CL5/CL3/CL1 Digital Mixing Console.

With the CL series firmware version 1.02, some specifications have added or changed since the publication of

the Owner’s Manual and Reference Manual. This manual contains descriptions of the added and changed

specifications.

Mounting limitation for two-space Premium Rack processor

(Reference Manual, p. 127)

A two-space Premium Rack processor (U76) can be mounted only in an odd-numbered rack.

Addition of PATCHING indicator

(Reference Manual, p. 136)

A PATCHING indicator has been added to the Function Access Area.

The PATCHING indicator appears when a DANTE INPUT PATCH setting or an I/O RACK OUTPUT PATCH

setting is changed. While this indicator is lit, a DANTE INPUT PATCH setting or an I/O RACK OUTPUT

PATCH setting cannot be changed continuously.

Summary of content (6 pages)

PAGE 1
Specification additions/changes for Yamaha CL5/CL3/CL1 V1.02 Thank you for choosing a Yamaha CL series CL5/CL3/CL1 Digital Mixing Console. With the CL series firmware version 1.02, some specifications have added or changed since the publication of the Owner’s Manual and Reference Manual. This manual contains descriptions of the added and changed specifications. Mounting limitation for two-space Premium Rack processor (Reference Manual, p.
PAGE 2
Using a Premium Rack with the MIDI PROGRAM CHANGE popup window (Reference Manual, p. 148) The procedure for using a Premium Rack has changed for the MIDI PROGRAM CHANGE popup window. If you have selected PREMIUM RACK in the TYPE field, you can select the rack number in the DESTINATION field and the library number in the LIBRARY NUMBER field. The DESTINATION field and LIBRARY NAME field also appear when you select SCENE in the TYPE field.
PAGE 3
Addition of options when loading a settings file (Reference Manual, p. 170) In the SAVE/LOAD popup window, you can select whether or not to load Dante settings while loading a settings file. WITH DANTE SETUP AND I/O RACK button When you turn off the button, settings related to DANTE SETUP and the I/O rack are excluded when the settings file is loaded. NOTE The SECONDARY PORT and CONSOLE ID settings in the DANTE SETUP popup window are not changed, even if the WITH DANTE SETUP AND I/O RACK button is on.
PAGE 4
Operation when changing NETWORK settings (Reference Manual, p. 191) After changing settings in the NETWORK popup window, which is accessed by pressing the SETUP button in the Function Access Area, then pressing the NETWORK button, the CL series must be restarted. NOTE The NETWORK setting is not changed, even if the CL series is initialized. Operation when changing settings in the DANTE SETUP popup window (Reference Manual, p.
PAGE 5
4. After waiting about 1 minute, plug the Ethernet cable into the Dante connector on the I/O rack, and then wait about 20 seconds before plugging the Ethernet cable into the Dante connector on the CL series. Changing the ID 1. Turn off the CL series. 2. Turn the I/O rack off, then on again. 3. Wait about 1 minute, and then turn on the CL series.
PAGE 6
I/O rack settings for scene recall (Reference Manual, p. 198) For each CL series unit, you can specify which I/O rack the information saved on the CL series will be applied to when the CL series is started up and when a scene is recalled. When there are multiple CL series units, specify the settings so that a scene is recalled to an I/O rack from only one CL series. Follow the steps below. 1. In the Function Access Area, press the SETUP button. 2.