User Manual

Yamaha Professional Audio CL StageMix V8 User Guide
Page 10
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under
“CHOOSE A NETWORK…”
c) Tap on the network’s name to edit the IP address.
d) Select [DHCP] and ensure that your iPad receives data for the IP
Address, Subnet Mask, Router and DNS.
e) Select [Renew Lease] if this data is not applied.
f) If the settings are successfully applied, press the iPad’s Home
button to exit the Settings menu.
Note:
• Make sure that the subnet of the IP address is the same as that of
the CL series console.
• If DHCP settings are not applied after step (e), please check your
DHCP server settings (refer to 11.4
for further advice). Alternatively,
setup your iPad using a Static IP Address.
3.2.2 Using a Static IP Address
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under
“CHOOSE A NETWORK…”
c) Tap on the network’s name to edit the IP address.