User Manual
Table Of Contents
- 1.0 System Requirements
- 2.0 Wi-Fi Settings
- 3.0 Getting Started
- 4.0 Mixer Window
- 4.1 Channel Bank Navigation
- 4.2 Layer Navigation
- 4.3 Channel Names and Colors
- 4.4 Faders
- 4.5 Channel ON
- 4.6 CUE
- 4.7 Dual Cue Mode
- 4.8 SOLO Mode
- 4.9 Master Bank
- 4.10 GAIN
- 4.10.1 Digital Gain
- 4.10.2 Gain Compensation Mode
- 4.10.3 Analog Gain / Digital Gain Link
- 4.10.4 ALL GC ON
- 4.10.5 ALL GC OFF
- 4.10.6 Input Port
- 4.10.7 Phantom Power
- 4.10.8 Phase
- 4.10.9 Dante Wireless Microphone Control and Monitoring
- 4.10.10 Non-Dante Wireless Microphone Control and Monitoring
- 4.10.11 Input Port Patching
- 4.10.12 Input Port Patch Options
- 4.10.13 Multi-Channel Input Patching
- 4.11 SENDS ON FADERS
- 4.12 DCA GROUP MASTER FADERS
- 4.13 DCA GROUP ASSIGNMENT
- 5.0 EQ / PAN / 5.1 / DYNAMICS/ SENDS
- 6.0 OUTPORTS
- 7.0 UTILITY
- 8.0 RACK
- 8.1 GEQ Racks
- 8.2 EFFECT Rack
- 8.3 EFFECT EDITING
- 8.3.1 Current Effect
- 8.3.2 Effect Type Selection
- 8.3.3 Effect Library
- 8.3.4 Input and Output Patch Assignments
- 8.3.5 Input and Output Meters
- 8.3.6 Effect Bypass
- 8.3.7 Effect Cue
- 8.3.8 Close Effect Editor
- 8.3.9 Parameter Editing using Sliders
- 8.3.10 Numerical Parameter Editing
- 8.3.11 Multi-Segment Buttons
- 8.3.12 Accessing Parameters
- 8.3.13 Additional Parameters
- 8.3.14 Wet/Dry Mix
- 8.4 GRAPHICAL EFFECT EDITING
- 8.4.1 REV-X Time/Level Parameters
- 8.4.2 REV-X Space Parameters
- 8.4.3 REV-X Filter Parameters
- 8.4.4 REVERB Time/Level Parameters
- 8.4.5 REVERB Space Parameters
- 8.4.6 REVERB Filter Parameters
- 8.4.7 REVERB Dynamics Parameters
- 8.4.8 STEREO REVERB Program
- 8.4.9 MONO/STEREO/MOD DELAY Parameters
- 8.4.10 DELAY LCR Parameters
- 8.4.11 ECHO Parameters
- 9.0 SCENE MEMORY
- 10.0 SETUP
- 10.1 Fader Delay
- 10.2 Filled EQ Graph
- 10.3 Enable Inc/Dec Scene Recall
- 10.4 Show Send Levels in Meter Bridge
- 10.5 Enable Phantom Power Switching
- 10.6 Set EQ band to 0dB with Double-Tap
- 10.7 Show dB Markings on Mixer
- 10.8 Set DCA to 0dB with Double-Tap
- 10.9 Disable Screen Auto-Lock
- 10.10 Cue Operation Mode
- 10.11 Cue A Mode
- 10.12 Cue B Mode
- 10.13 Solo in Place Mode
- 10.14 Channel Select – StageMix Follows Console
- 10.15 Channel Select – Console Follows StageMix
- 10.16 Input Meter Point
- 10.17 Output Meter Point
- 10.18 Display Key Input for Dynamics Meters
- 10.19 RTA Peak Hold Mode
- 10.20 RTA Input Gain
- 10.21 RTA Number of Bands
- 11.0 Troubleshooting
Yamaha Professional Audio CL StageMix V8 User Guide
Page 2
CONTENTS
Page
1.0
System Requirements ..................................................................................... 8
2.0 Wi-Fi Settings ................................................................................................... 8
3.0 Getting Started ................................................................................................. 9
3.1 CL series Network Setup .............................................................................. 9
3.2 iPad Wi-Fi Settings ....................................................................................... 9
3.2.1 Using DHCP ............................................................................................. 9
3.2.2 Using a Static IP Address ....................................................................... 10
3.2.3 Network switching (V7.0 and later) .......................................................... 11
3.3 StageMix Setup .......................................................................................... 12
3.3.1 OFFLINE DEMO ..................................................................................... 12
3.3.2 Configure StageMix to Work with a CL series Console ........................... 12
3.3.3 Select a Mixer ......................................................................................... 14
3.3.4 Connect and Synchronize with the CL Console ...................................... 14
3.3.5 Edit Mixer Configurations ........................................................................ 14
4.0 Mixer Window ................................................................................................. 15
4.1 Channel Bank Navigation ........................................................................... 15
4.2 Layer Navigation ........................................................................................ 15
4.2.1 Custom Fader Layer ................................................................................. 16
4.2.2 Custom Fader Bank Naming .................................................................... 17
4.2.3 Storing of Custom Meter Bridge Layout and Names ................................ 18
4.3 Channel Names and Colors ....................................................................... 18
4.4 Faders ........................................................................................................ 18
4.4.1 Long Faders ........................................................................................... 19
4.4.2 Navigation in Long Faders Mode ............................................................ 19
4.5 Channel ON ............................................................................................... 19
4.6 CUE ............................................................................................................ 19
4.7 Dual Cue Mode .......................................................................................... 20
4.7.1 Channel Mode ........................................................................................ 20
4.7.2 Cue Clear ............................................................................................... 20
4.7.3 Remote Mode ......................................................................................... 20
4.8 SOLO Mode ............................................................................................... 20
4.9 Master Bank ............................................................................................... 22
4.10 GAIN .......................................................................................................... 23
4.10.1 Digital Gain ............................................................................................. 23
4.10.2 Gain Compensation Mode ...................................................................... 24
4.10.3 Analog Gain / Digital Gain Link ............................................................... 24
4.10.4 ALL GC ON ............................................................................................. 24
4.10.5 ALL GC OFF ........................................................................................... 24
4.10.6 Input Port ................................................................................................ 24
4.10.7 Phantom Power ...................................................................................... 25
4.10.8 Phase ..................................................................................................... 25
4.10.9 Dante Wireless Microphone Control and Monitoring .............................. 25
4.10.10 Non-Dante Wireless Microphone Control and Monitoring ..................... 26
4.10.11 Input Port Patching ............................................................................... 27
4.10.12 Input Port Patch Options ...................................................................... 29
4.10.13 Multi-Channel Input Patching................................................................ 29
4.11 SENDS ON FADERS ................................................................................. 31