User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
User settings (Security)
Reference Manual
169
• POPUP APPEARS WHEN KNOB(S) PRESSED
Specifies whether pressing a knob in the SELECTED CHANNEL section while the SELECTED
CHANNEL VIEW screen is displayed will cause a popup window (1ch) to appear. If the ON
button is lit, a popup window (1ch) will open (or close) whenever you press a knob.
NOTE
If you press the SEND or PAN knob, a popup window (8ch) will open.
• GAIN KNOB FUNCTION
Specifies what will happen when you operate the GAIN knob in the SELECTED CHANNEL
section on the panel. When the ANALOG GAIN button is lit, you can adjust analog gain on the
head amp. When the DIGITAL GAIN button is lit, you can adjust digital gain on the console.
• SCENE UP/DOWN
Specifies what the SCENE MEMORY [INC]/[DEC] keys will do when pressed in the SCENE
popup windows.
When the SCENE +1/–1 button is lit, pressing the [INC] or [DEC] key will increment or
decrement the scene number.
When the LIST UP/DOWN button is lit, pressing the [INC] or [DEC] key will scroll the list
upward or downward.
•LIST ORDER
Specifies the order in which scene memories and library items will appear on the list.
When the NORMAL button is lit, the list appears in ascending numerical order. When the
REVERSE button is lit, the list appears in descending numerical order.
•NAME DISPLAY
Specifies the content of the channel name display on the top panel.
When the NAME ONLY button is lit, only the channel name appears. When the FULL
FUNCTION button is lit, the channel name display also indicates knob assignment information
and fader level.
4. Use the buttons on screen to make Preference settings.
5. When you have finished making settings, close the popup window and press the
SETUP button in the Function Access Area.
USER DEFINED keys
This section explains how to assign the desired functions to the USER DEFINED keys in the USER
DEFINED KEYS section on the top panel, and press these keys to execute the defined function.
This assignment procedure will define the USER DEFINED keys for the user who is currently logged-
in, but if you are logged-in as the Administrator, you can also make USER DEFINED key settings for
the Guest account.
1. In the Function Access Area, press the SETUP button to access the SETUP screen.
2. Press the USER SETUP button to access the USER SETUP popup window.
3. Press the USER DEFINED KEYS tab to select the USER DEFINED KEYS page.
If you are logged-in as the Administrator, you can also turn on the FOR GUEST button in the
lower right of the screen to access the USER DEFINED KEYS for Guest page and make USER
DEFINED key settings for the Guest account.
The sixteen buttons on screen corresponds to USER DEFINED keys [1]–[16] on the top panel.
The name of function or parameter assigned to each key appears to the right of the corresponding
on-screen button. If nothing is assigned to the key, an indication of “---” will appear next to the
button.