User Manual

1.4. An overview of ProVisionaire Design
• Broadly speaking, ProVisionaire Design is divided into a "Project" sheet, "Tuning" sheet, and device sheet.
The "Project" sheet registers devices and makes settings for them. The "Tuning" sheet enables you to set
up a link group to control multiple amp channels collectively. A link group that you specify can be
operated using the Link Group Editor. The device sheet specifies detailed settings and control of each
device.
• Parameters for the entire project can be recalled using the "Linked Presets Manager" dialog box. For
details on how to store/recall for each device, refer to the page for each device.
• Default values (other than position information) for the Properties can be stored on the computer as a
user style. By saving a user style, you can avoid having to change the settings each time you add a device
to the project. User styles can also be transferred to another computer.
• Devices can be grouped as a Device Group. Grouping multiple devices together allows unified
management of their power, etc.
• By using the SOLO function in the “Tuning” sheet, you can control the audio output for each link group
separately.
• When speakers are placed in the "Project" sheet and connected to a PC-series device, you can open the
"Speaker Editor" to adjust the response for individual speakers, or the "Multiple Speaker Editor" to adjust
the speaker parameter response for multiple speakers connected to the same power amplifier.
• When speakers are placed in the "Project" sheet and connected with a power amplifier, you can register
individual speakers in a link group.
1. Introduction
8 | ProVisionaire Design User Guide