User Manual

If this option is selected, the Mute state (–∞ dB) will be enabled if the level is lowered below
the value specified by [Lower Limit].
◦ [Sensitivity] list box
Sets the sensitivity of parameter changes in response to the downward operation of the DCP
switch.
•
[Control Type] list box
If Direct Parameter Value is selected
When the switch is pressed, the parameter becomes the value specified by Value.
•
[Control Type] list box
If Knob Assign is selected
When the switch is pressed, you can use the knob to operate the parameter assigned to the switch.
This function is only for DCP1V4S.
For the setting, refer to the knob section.
26. DCP
ProVisionaire Design User Guide | 329