User Manual
Table Of Contents
- How to Use This Reference Manual
- Table of contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Function Tree
Reference Manual
4
Function Tree
Page numbers in parentheses ( ) are the page numbers of the
Owner's Manual(booklet).
Main
SELECTED CHANNEL 6
OVERVIEW 13
FUNCTION ACCESS AREA (18)
CHANNEL PARAMETER
PATCH/NAME 18, 28, 50
GAIN/PATCH 29
1ch 29
8ch 30
CH1-48 32
CH49-72/ST IN 32
OUTPUT
Indication only
INPUT DELAY 40
8ch 41
CH1-48 42
CH49-72/ST IN 42
DELAY SCALE 41
INSERT/DIRECT OUT 21
1ch 21, 24
8ch 22, 24
HPF/EQ 58
1ch 58
8ch 60
CH1-48 60
CH49-72/ST IN 60
OUTPUT 60
DYNAMICS 61
1ch 61
KEY IN SOURCE SELECT 62
8ch 63
CH1-48 64
CH49-72/ST IN 64
OUTPUT 64
CHANNEL PARAMETER
MIX SEND/MATRIX SEND 38
TO STEREO/MONO 51
8ch 51
CH1-48 52
CH49-72/ST IN 52
OUTPUT 52
SURROUND 44
LIBRARY
CHANNEL LIBRARY 48
EQ LIBRARY 64
DYNAMICS LIBRARY 64
GEQ/PEQ LIBRARY 153
EFFECT LIBRARY 153
Portico5033/Portico5043/U76/Opt-2A/
EQ-1A/DynamicEQ LIBRARY
153
DANTE INPUT PATCH LIBRARY 155
RACK
VIRTUAL RACK 125
RACK MOUNTER 128
GEQ EDIT 129
RACK LINK 129
EFFECT RACK 139
EFFECT EDIT 139
EFFECT TYPE 139
PREMIUM RACK 144
PREMIUM RACK MOUNTER 145
PREMIUM RACK EDIT 146
AUTOMIXER 135
PARAMETRIC EQ 132
I/O DEVICE
DANTE PATCH 154
DANTE INPUT PATCH 155
OUTPUT PATCH 156
I/O 156
AMP 159
WIRELESS 160
EXTERNAL HA 162
EXTERNAL HA RACK 162
EXTERNAL HA EDIT 162
EXTERNAL HA PORT SELECT 163
MONITOR
MONITOR 103
CUE 112
MONITOR 105
OSCILLATOR 117
TALKBACK 115
METER
INPUT METER 119
OUTPUT METER 119
SETUP
USER SETUP 186
PREFERENCE 195
USER DEFINED KEYS SETUP 197
USER DEFINED KEY SETUP (List) 197
USER DEFINED KNOBS SETUP 203
USER DEFINED KNOB SETUP (List) 203
ASSIGNABLE ENCODER SETUP 206
CUSTOM FADER BANK/MASTER FADER 209
FADER ASSIGN SELECT 208
USER LEVEL/CREATE USER KEY 189
CREATE KEY 190
SAVE KEY 193
LOGIN 191
SAVE/LOAD 211
WORD CLOCK/SLOT SETUP 218
CASCADE IN/OUT PATCH 221, 222
I/O DEVICE