User Manual
Table Of Contents
- Contents
- PRECAUTIONS
- Introduction
- About Dante
- Controls and Functions
- Display Operations
- Operation Flow
- Menu structure
- Selecting menu items
- About the parameter display
- Selecting ports
- About port names
- METER menu
- GAIN menu
- +48V ON menu
- HPF ON menu
- HPF F menu
- GC (Gain Compensation) ON menu
- About the status indication
- SETUP menu
- Status bar
- INFORMATION menu
- Support for Dante Domain Manager (DDM) (V1.10 or later)
- Other functions
- About Connections
- Head Amp Control
- Troubleshooting
- Specifications
Display Operations
Owner’s Manual
22
Support for Dante Domain Manager (DDM) (V1.10 or later)
NOTE
Firmware V1.10 or later is required for Rio-D2 to enroll a domain with DDM.
INFORMATION – DANTE screen
When enrolling a domain:
The DDM indicator appears at the top of right side of the DANTE screen.
The R/W indicator or the R/O indicator also appears, depending on the LOCAL CONTROLLER ACCESS setting for the
DDM server.
* LOCAL CONTROLLER ACCESS = Read Write
* LOCAL CONTROLLER ACCESS = Read Only
When the local access is set to “Read Only,” changing the Dante settings (UNIT ID, SECONDARY PORT) on the Rio-D2
unit will result in the following pop-up message.
When a DDM domain is enrolled, unregistering the domain will result in the DISC indicator appearing at the top right
side of the screen. In addition, when a DDM domain is enrolled without connecting to the DDM server, the DISC
indicator also appears.