User Manual

Example Program for Crestron - Setup Guide -

6. Configure Options - Screensaver

Here you can set the screensaver. The purpose of the screensaver is not to save the

screen, but to enable moving images to attract the attention of exhibition attendees.

The options are

Blank: No screensaver. Touch panel will go to black when not in use.

Slides: A display of product pictures will cycle around with the words “Touch to

start” displayed.

Video: This allows the Crestron’s video input via the break-in box to be connected

to a video source such as a DVD player to show moving images. The video is just for

the screensaver and not displayed on any other screens.

7. Configure Options – File Path

This sets the path where the product images, text and language flags are loaded from.

By default this should be left as the Crestron processor’s IP address.

8. Press “Done” to finish and return to normal operation

Note that the screensaver will still operate after a period of inactivity whilst in the

configuration page. This is a deliberate security feature to ensure that the panel is not

left in the configuration page by accident.