User Manual

Example Program for AMX - Setup Guide -
11
Step 9: AMX file extracting, compiling and transferring
Extract AMX files which are zipped in YamahaCA_AMX_ExampleV1.0_Programming.zip,
YamahaCA_AMX_ExampleV1.0_TP.zip and
YamahaCA_AMX_ExampleV1.0_DynamicContentsRev1.2.zip.
The files in YamahaCA_AMX_ExampleV1.0_DynamicContentsRev1.2.zip should be put in
a folder called “images” which is located in “/doc:user/images” as shown below by FTP
transfer. These files are used for multi-lingual capability. If you don’t carry out this transfer,
text won’t be displayed on the touch panel.
You will need the following information for FTP transfer.
Host: 192.168.201 (NI-700 IP address)
Username: NetLinx (default name)
Password: password (default password)
Other files should be compiled and transferred as usual.