User Manual

Example Program for AMX - Setup Guide -
12
Known issues
The following issues are known limitations:
BD-S2900 Blu-ray player
Pressing a transport button (play, stop etc), the touch panel takes 5 seconds to update the
display, due to the feedback speed from the BD-S2900.
Troubleshooting tips / FAQ
Tip:
If you momentarily press the
logo, the touch panel will return to the screensaver,
without waiting for the time out. This is useful at the end of a demonstration to a customer.
Serial cabling (RS-232)
Q: Does it matter what serial cable I use for what?
A: Yes! The BD-S2900 has quite unusual serial wiring! Please use a dedicated cable for it.
The DME24N/64N and IMX644 use more conventional “null modem” wiring. Refer to the
product manuals for further information.
Touch panel operation
Q: When I press a scene, why does nothing happen?
A: The connected device has to have a scene stored in it.
Q: The Touch panel shows “connecting…”
A: This is waiting or in the process of connecting to the AMX NI-700 processor. Check
Ethernet connections, and network activity lights.
If necessary, re-boot the processor and or touch panel.
Video (optional)
Q: How do I get video working on the touch panel?
A: You must connect from a video source (e.g. DVD/Blu-ray player) with either composite
video (1 BNC) or Y/C outputs (2 BNCs). Connect the output from the source to the NXA-
AVB/ETHERNET break-in-box. Connect the break in box to the touch panel using the
black power cable and CAT5 cables for Ethernet and Video. The touch panel does not
accept RGB video.
Yamaha CA Support Centre Europe