User Manual

MG12XUK Owner’s Manual

Troubleshooting

STEP 2 Setting Switches and Controls

 Check the overall balance

Use the settings shown in the illustration to check the overall balance from speakers or headphones.

[GAIN] knobs

Turn until the [PEAK] indi-

cator begins to flash inter-

mittently.

Level meter

If the level meter [PEAK] indica-

tor flashes frequently, lower the

[LEVEL] knobs for each chan-

nel.

[PHANTOM +48V] switch

Turn this switch on (the indicator lit) when using a condenser microphone.

• To prevent an unwanted burst of noise from the speakers, turn off powered speak-

ers (or power amps) before turning on the [PHANTOM +48V] switch.

[PEAK]

indicators

[MONITOR/PHONES] knob

For adjusting the headphone

level and the MONITOR level.

[LEVEL] knobs

For adjusting the level for each

channel.

[STEREO LEVEL] knob

For adjusting the overall volume,

with “” as the nominal level.