User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Touch
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Startup
- Basic process
- Operations for common settings
- About the menu bar
- Settings file management — the File Management button
- Selecting multiple widgets — Multi Select button
- Creating a custom panel — the Page Edit button
- Widget design
- Assigning parameters
- Switching pages — the Page Selection button (Control mode)
- Managing pages — the Page Management button (Design mode)
- Registering devices to control — the Device Management button
- Control panel settings — the Setup button
- Control panel information — the Information button
- Preparations before you make connections
- Troubleshooting
- About the software license
75
Tips for network settings
1. The IP addresses of the devices you’re connecting must be
set to the same subnetwork.
*1 If the Wi-Fi access point does not have router functionality, specify the IP
address for accessing the Wi-Fi access point device.
2. Connect the target system to a LAN port of the Wi-Fi access
point.
If you connect it to the Ethernet port (WAN port), it will be
impossible to communicate correctly between the smart
device and the target system.
3. Start ProVisionaire Touch.
ProVisionaire Touch detects the target system and connects
automatically.
Example of a cor-
rect combination
of settings
Example of an
incorrect combi-
nation of settings
The Wi-Fi access point device’s
internal router and DNS
*1
192.168.0.254 192.168.11.1
Target system 192.168.0.1 192.168.0.1
iPad 192.168.0.200 192.168.11.50
Computer 192.168.0.253 192.168.11.253