User Manual
Table Of Contents
- Yamaha LAN Monitor for Win
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Win
8.5. [Snapshots] button
Saves the current network connection status to Yamaha LAN Monitor as a snapshot.
Click the [Snapshots] button to display a save snapshot confirmation message. Click [OK] to save the
snapshot.
NOTE
• The snapshot function compares the current network connection status with
the previously saved snapshot and displays a message in the “Notification” area
when a change is detected.
• To save device information to a snapshot, in [Basic Settings] under [Snapshot
function], select the [Treat equipment as comparison for snapshots] check
box.
• The [Snapshots] button cannot be used until an agent is detected.
• Agents that have been detected by Yamaha LAN Monitor even once are not
recognized as new agents.
8.5.1. Using the snapshot function
1.
Click the [ ] button.
This opens the “Take Snapshot” dialog box.
2.
Click the [OK] button.
This saves a snapshot and begins monitoring.
NOTE
When a change is detected, click the [Notifications] button to view details of
changes made in the Notification area. For more details on the types of messages
that appear, refer to “If a change is detected”.
8. Toolbar and display area
Yamaha LAN Monitor for Win User Guide | 27