User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“EXT. I/O” screen Chapter 4. System screen
MTX-MRX Editor User Guide
120
“EXT. I/O” screen
Here you can select the signal routing for the MTX series and MRX series unit’s YDIF connectors and
analog connectors.
❑ “YDIF” screen (Distribution mode)
This screen appears in Distribution mode.
1 [YDIF 1-8] button
Displays the “YDIF1-8” screen. Here you can specify the routing for YDIF channels 1–
8.
2 [YDIF 9-16] button
Displays the “YDIF9-16” screen.
Here you can specify the routing for YDIF channels 9–16.
3 [ANALOG] button
Displays the “ANALOG” screen.
4 [DANTE] button
Displays the “DANTE” screen.
5 [EDIT] button
Enables the input routing select buttons / output routing select buttons of a device other
than an MTX/MRX unit.
The [EDIT] button is available only in Distribution mode when a device other than an MTX/
MRX unit is connected via YDIF and the system is offline.
12345
7
8
6
9
NOTE