User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Online Chapter 5. Online and Synchronization
MTX-MRX Editor User Guide
140
Procedure
1. In the toolbar, click the [Online] button.
The “Synchronization” dialog box will appear, allowing you to choose the direction
of synchronization.
2. Choose either [To Device] or [From Device] to specify the direction in
which synchronization will occur.
Click the [OK] button to switch to a display that lets you choose the system that will
be synchronized. If you click the [Cancel] button, the operation will be cancelled.
If you chose [To Device]
The settings of MTX-MRX Editor will be transmitted to the devices, overwriting
their settings.
If you chose [From Device]
The settings of the devices will be loaded into MTX-MRX Editor.
If the PIN code differs between MTX-MRX Editor’s project file and the devices, a PIN
code entry dialog box will appear. Enter the correct PIN code to go online.
3. Select the MTX/MRX system that you want to place online.
• [Detail] button
Displays the progress, synchronization status, and error messages for the devices in
each MTX/MRX system.
4. Click the [Online] button.
Synchronization will begin. If you click the [Cancel] button, the operation will be
cancelled.
If an MRX is assigned to the MTX/MRX system that is being brought online, but
compile has not yet been executed, compile is executed automatically. If compile fails
or if the memory usage exceeds 100%, the “Compile” dialog box appears, and
synchronization is stopped.
NOTE
NOTE