User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“MCP1” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
209
● [Save] button
This button saves an item in the library. The “Save Library” dialog box will appear. If
you edit the parameters of the loaded library item, the text will turn red. The text will
turn black when you save or load the library item.
•[Name:]
Enter a name for the library item.
You can’t enter the name of an existing library item, nor can you enter a blank name.
• [OK] button
Saves the library item and closes the dialog box.
•[Cancel] button
Closes the dialog box without creating a library item.
● [Load] button
When you click this button, the currently selected library item will be loaded as the
current parameters.
● [Library] list
Select the library item that you want to save or load. The currently-loaded library item
is shown in bold characters.
By double-clicking a previously-saved library item, you can edit its name.
• [Copy] button
This button copies the selected library item.
The Copy command is not available while online.
•[Paste] button
This button pastes the copied library item to the library item that’s currently selected
in the list.
The Paste command is not available while online.
•[Clear] button
This button clears the contents of the library item that’s currently selected in the list.
The Clear command is not available while online.