User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Screen select buttons Chapter 4. System screen
MTX-MRX Editor User Guide
58
Screen select buttons
Use these buttons to switch between units in the MTX/MRX system and to access various
functions.
● [MTX]/[MRX] buttons
Use these buttons to select the MTX/MRX unit whose settings you want to edit. The
button shows the UNIT ID and device name. There will be one [MTX]/[MRX] button
for each MTX/MRX unit in the MTX/MRX system.
In the “MRX” screen, click the [Open MRX Designer] button to access the “MRX
Designer” window. For details, refer to “MRX Designer User Guide.”
•[MAIN] button
Displays the “MAIN” screen.
• [INPUT] button
Displays the “INPUT” screens.
• [MATRIX] button
Displays the “MATRIX” screen.
•[ZONE] button
Displays the “ZONE” screen.
• [ROUTER] button
Displays the “ROUTER” screen.
•[OUTPUT] button
Displays the “OUTPUT” screens.
• [EFFECT] button
Displays the “EFFECT” screen.
• [DCA] button
Displays the “DCA” screen.
• [I/O] button
Displays the “I/O” screen.
•[MY4-AEC] button
Displays the “MY4-AEC” screen.
● [EXT. I/O] button
Displays the “EXT. I/O” screen.
● [EXi8] button
Displays the “EXi8” screen.
● [R/Tio] button
Displays the “R/Tio” screen.
● [EXo8] button
Displays the “EXo8” screen.
● [XMV] button
Displays the “XMV” screen.