User Manual

Panel Operation — CONFIG WIZARD screen (Advanced mode)
23
PX10/PX8/PX5/PX3 Reference Manual
 ROUTING
Selects the route of the input signal from four types: DUAL, PARALLEL, SINGLE, and
SUM.
• DUAL (Dual mode):
Sends the input signal from channel A to speaker A, and sends the input signal from
channel B to speaker B.
• PARALLEL (Parallel mode):
Sends the input signal from channel A to both speaker A and speaker B. Channel A and
channel B can be set differently.
• SINGLE (Single mode):
Sends only the input signal from channel A.
• SUM (Sum mode):
Mixes and sends the input signals from channel A and channel B.
[SPEAKERS] A
[SPEAKERS] B
[INPUT] A
[INPUT] B
VOL
VOL
Input
processor A
Speaker
processor A
Input
processor B
Speaker
processor B
[INPUT] A
[INPUT] B
Input
processor A
Speaker
processor A
Input
processor B
Speaker
processor B
VOL
BAL
[SPEAKERS] A
[SPEAKERS] B
NOTE
The volume knob is available only for control of channel A. The volume of channel B is linked to
that of channel A.
NOTE
• Depending on the SP TYPE (speaker type, page 22), the menu choices may be limited. For
details, refer to “PX amplifier available system configurations” (page 6).
• Regarding input processors and speaker processors, refer to “Signal processing in PX amplifier”
(page 7). For setting instructions, refer to “TUNING screen” (page 25).
[INPUT] A
[INPUT] B
Input
processor A
Speaker
processor A
Speaker
processor B
VOL
BAL
[SPEAKERS] A
[SPEAKERS] B
[INPUT] A
[INPUT] B
Input
processor A
Speaker
processor A
Input
processor B
Speaker
processor B
BAL
[SPEAKERS] A
[SPEAKERS] B
VOL