User Manual

Panel Operation — TUNING screen
26
PX10/PX8/PX5/PX3 Reference Manual
 DELAY
(Advanced mode only)
Sets the delay time to compensate the distance between speakers. Sets according to ether
time or distance.
q ON/OFF
Turns the delay on/off.
w TIME [ms]
Sets the delay time in milliseconds.
e DISTANCE [m / feet]
Sets the delay time by physical distance (in meters or in feet).
 X-OVER (crossover)
(If “SP TYPE” is “FULL+SUB” or “BI-AMP”)
Sets the crossover frequency of channel A and channel B.
q X-OVER FREQ.
Sets the crossover frequency. The crossover frequency to be set is the cutoff frequencies
of the LPF of channel A and the HPF of channel B.
NOTE
Three delay time indications change in conjunction.
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
e
w
Channel
Input processor Speaker processor
D-Contour HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
Channel
Input processor Speaker processor
Low pass filter High pass filterCrossover frequency
Frequency