User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and functions
- Setup
- Panel Operation
- Reference
Panel Operation — TUNING screen
27
PX10/PX8/PX5/PX3 Reference Manual
HPF (high pass filter)
Sets the high pass filter.
q ON/OFF
(Basic mode only)
Turn on/off the filter.
w TYPE (filter type)
(Advanced mode only)
Selects the attenuation per octave and the filter type.
e FREQ (Cutoff frequency)
Sets the cutoff frequency of the HPF.
r Gc (Cutoff gain)
(Advanced mode only)
Sets the gain at the cutoff frequency if “AdjustGc” (Adjustable Gc) is selected in “HPF
TYPE.”
LPF (low pass filter)
Sets the low pass filter.
q ON/OFF
(Basic mode only)
Turns the filter on/off.
w TYPE (filter type)
(Advanced mode only)
Selects the attenuation per octave and the filter type.
e FREQ (Cutoff frequency)
Sets the cutoff frequency of the LPF.
r Gc (Cutoff gain)
(Advanced mode only)
Sets the gain at the cutoff frequency if “AdjustGc” (Adjustable Gc) is selected in “LPF
TYPE.”
NOTE
• If “THRU” is selected, filter is off.
• A filter on 12 db/Oct or more can be selected from four types (below): Adjustable Gain Con-
trol, Butterworth, Bessel, and Linkwitz Riley.
For example, the 12 dB/Oct. Butterworth type is displayed as “12dB BUT.”
D-Contour
HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
e
e
w
r
Input processor Speaker processor
Basic mode
Channel Channel
Advanced mode
Filter type Display
Adjustable Gain Control ADJGc
Butterworth BUT
Bessel BESSL
Linkwitz Riley L-R
NOTE
• If “THRU” is selected, filter is off.
• A filter of 12 db/Oct or more can be selected from four types (below): Adjustable Gain Con-
trol, Butterworth, Bessel, and Linkwitz Riley.
For example, the 12 dB/Oct. Butterworth type is displayed as “12dB BUT.”
D-Contour
HPF LPF Polarity Level Limiter
6 Band
PEQ
Delay
Speaker
Delay
q
e
e
w
r
Input processor Speaker processor
Basic mode
Channel Channel
Advanced mode
Filter type Display
Adjustable Gain Control ADJGc
Butterworth BUT
Bessel BESSL
Linkwitz Riley L-R