User Manual

Panel Operation — TUNING screen
30
PX10/PX8/PX5/PX3 Reference Manual
 LIMITER
(Advanced mode only)
For changing the settings of the limiter depending on the speaker specifications, in order to
protect the speaker.
q ON/OFF
Turns the limiter on/off.
w THRESHOLD
Sets the threshold beyond which the limiter is activated according to output power
(Watt).
e IMPEDANCE (Ω/UNIT)
Sets the impedance of the speaker for connection (16Ω, 12Ω, 8Ω, or 4Ω).
When connecting speakers in parallel, set this parameter by a single speaker's imped-
ance.
 CHANNEL LINK
(Advanced mode only, if “SP TYPE” is “FULL+FULL” or “SUB+SUB”)
Links the parameter setting of channel A and channel B.
q ON/OFF
When the setting is changed from off to on, the device initially makes the settings of
channel A and channel B identical. If a setting is operated for channel A, the settings of
channel A are copied to the settings of channel B. If a setting is operated for channel B,
the settings of channel B are copied to the settings of channel A.
 CHANNEL COPY
(Advanced mode only; when “SP TYPE” is set to “FULL+FULL” or
“SUB+SUB”)
Copies settings between channels.
q Ach –> Bch
Copies the settings of channel A to channel B.
w Bch –> Ach
Copies the settings of channel B to channel A.
NOTE
• When a speaker is selected with Configuration Wizard, “THRESHOLD” is automatically set.
• When connecting speakers in parallel, set this parameter according to the specified output
power for a single speaker.
D-Contour
Delay
HPF LPF Polarity
Speaker
Delay
Level Limiter
6 Band
PEQ
w
e
q
Channel
Input processor Speaker processor
Channel
q
q
w