User Manual

Panel Operation — TUNING screen
31
PX10/PX8/PX5/PX3 Reference Manual
 SAVE/LOAD
(Advanced mode only)
You can save/load SP TUNING DATA by using an USB flash drive.
q SAVE SP TUNING
Saves the setting file to the USB flash drive.
Select this menu to display the file name screen. Rotate the main knob to select the
position for inputting the character and press the main knob to switch to character entry.
Then rotate the main knob to select the character to be input and press the main knob to
actually enter it. By pressing the [ ] (back) key in the character entry mode, you can
return to position selection. Selecting “OK” in this state confirms the title. Selecting
“OK” in the confirmation screen saves the setting file. Finally select “OK” to return to
the previous screen.
w LOAD SP TUNING
Loads the setting file in the USB flash drive.
Select this menu to display the list of files. Rotate the main knob to select a file, and
then press the main knob to display the confirmation. Press “OK” to start loading. After
loading is complete, a confirmation message will appear. Press “OK” to return to the
previous screen.
NOTE
• You can enter up to sixteen alphanumeric characters.
• Available characters include ASCII types and some symbols.
Channel
q
w
NOTE
• Files which have file name over sixteen characters are not shown in the list.
• File names containing unavailable characters on the PX unit are not displayed.