User Manual

Panel Operation — Initializing the PX amplifier
37
PX10/PX8/PX5/PX3 Reference Manual
 LOG
(Advanced mode only)
Indicates or saves the operation log in the PX amplifier.
q LOG LIST
Indicates the overall operation log stored in the PX amplifier.
The log is displayed in the order that events have occurred. The time information is dis-
played in “NNNN HHH:MM:SS” format, where the format represents the number of
hours (HHH)/minutes (MM)/seconds (SS) have elapsed since the (NNNN)
th
power-on.
• Operation log indication
Rotating the main knob (to select an event) and pressing the knob (to actually determine
the event) show the detailed view.
w SAVE TO USB
Save the latest operation log to a USB flash drive. The function is for user support refer-
ence.
There are three ways to initialize the PX amplifier.
 To initialize the current parameters
1. Turn on while pressing the [A] key.
2. Rotate the main knob to select “CONFIG+TUNING” and press
the main knob.
NOTE
The Operation log can also be called up by selecting and determining the [ ] icon by using
the main knob when the [ ] icon is shown in the HOME screen.
q
w
Initializing the PX amplifier
NOTE
Current parameters are parameters set in the CONFIG WIZARD, AMP PRESET, and TUNING
screens. For details, refer to “Function list” (page 39).