User Manual

•
[Fx1]/[Fx2] button
If these buttons are on, the effect type and the following settings will be recalled.
◦
Send level from the input channel to the effect bus, send on/off
◦
Effect return level, on/off (mute)
◦
Effect return name
•
[DCA] button (INPUT side)
If this is on, the following settings will be recalled.
◦
The input channel’s assignment to DCA or mute group
◦
Main level of the DCA group
◦
Main mute of the mute group
•
[Automixer] button
If this is on, the settings of the Dugan Automixer will be recalled.
•
[MATRIX SEND] button
If the button at the left is on, the following settings will be recalled. If the button at the right is on, the
matrix out level will be recalled.
◦
Send level from the input channel to the matrix bus, send on/off, and stereo channel pan
◦
Send level from effect return to the matrix bus, send on/off, and stereo channel pan
•
[ANC1 SEND]/[ANC2 SEND] button
If these buttons are on, the send level from the input channel to the ANC bus and the send on/off status
will be recalled.
•
[ZONE] button
If this is on, the following settings will be recalled.
◦
1st Priority のPriority Source、Mix Level、Ducker
◦
2nd Priority のPriority Source、Mix Level、Ducker
◦
ANC
◦
Zone name

In the “MTX Configuration” dialog box, if [INPUT PORT SETUP] is changed from “MONO x2” to
“STEREO,” the setting of the [ZONE] button will follow the oddnumbered zone.
•
[PAGING] button
Turning this on recalls the setting of the PAGING [ON] button.
•
[ZONE OUT] button
If this is on, the ZONE Out Level and on/off (mute) will be recalled.
•
[DCA] button(ZONE side)
If this is on, the following settings will be recalled.
◦
ZONE Out’s channel assignment to DCA or mute group
◦
Main level of the DCA group
◦
Main mute of the mute group
•
[ROUTER] button
If this is on, the router settings will be recalled.
•
[LEVEL]/[OUTPUT] button
If the [LEVEL] button is on, the output channel level and on/off (mute) settings will be recalled.
If the [OUTPUT] button is on, the Room EQ, Delay, and Speaker Processor settings will be recalled.
These can be specified individually for each channel.
14. Audio Processors : MTX5-D/MTX3
206 | ProVisionaire Design User Guide