User Manual

A static IP address is set for the virtual device.

8. Click the [OK] button.

To assign an IP address to a real device, you can either make settings by operating the real device, or you can

use the "IP Address" dialog box to specify an IP address for the real device.

Here we will explain how to use the “IP Address” dialog.

Next, we will explaine the procedure for setting the IP address set for the virtual device to the real device.

1. Set the Unit ID of the real device to match the virtual device.

2. Connect the real device to the same subnet as ProVisionaire Design so that it can be discovered by

ProVisionaire Design.

For details, refer to the owner’s manual of each device.

While still offline, click [IP Settings] in the [System] menu of ProVisionaire Design.

If the "Network Setup" dialog box appears, sselect the same network as ProVisioniare Design.

28. Settings for controlling devices across subnets

346 | ProVisionaire Design User Guide