User Manual

•
IP Address Range Finder
This section enables you to calculate the range of IP addresses that can be assigned.
◦ [IP Address]
Enter the IP address that you want to use.
◦ [Subnet Mask]
Select the subnet mask.
◦ [Find Range] button
When you click this, the range that can be specified is calculated from the IP address and subnet
mask that you input.
◦ [Range]
Shows the calculated range of IP addresses.
◦ [Default Gateway]
Shows the calculated default gateway.
•
[Apply IP Address] button
When you click this, the IP address calculated in "IP Address Range Finder" and the default gateway are
applied to the devices in the device list.
•
[All On] button
Selects all devices in the device list to be affected by [Apply IP Address].
•
[All Off] button
Deselects all devices in the device list from being affected by [Apply IP Address].
•
[All Clear] button
Deletes the IP address information of the devices.
•
Device list
Here you can view and edit the settings of the devices in the device list.
◦ Check box
If this is selected, [Apply IP Address] will apply to this device.
◦ [IP Address]/[Subnet Mask]/[Default Gateway]
10. Dialog boxes
ProVisionaire Design User Guide | 75