User Manual

10.17. "Clock" dialog box
To open this dialog box, click [Clock] from the [System] menu on the menu bar.
The internal clocks for all connected devices are automatically updated to match the date and time on the
computer each time the devices come online.
If you transmit the computer’s date and time information from this dialog box, the date and time will be updated
on any unit that is connected to the same network, regardless of its online/offline status.
10.17.1. RM Series
This section applies to the settings for the RM series units.
•
Device list
Displays the current device settings.
•
Time Zone
Specifies the time zone.
•
[NTP Support]check box
If this check box is selected, the NTP server is used.
•
[Enable Daylight Saving Time]check box
If this check box is selected, the daylight saving time indication will be enabled.
10. Dialog boxes
ProVisionaire Design User Guide | 89