User Manual

Quadrafuzz v2
Quadrafuzz v2 is a multi-band distortion and multi-effect plug-in for processing drums and loops, but
also for treatment of vocals. You can distort up to 4 bands. 5 different distortion modes with several
sub-modes are available.
Frequency Band Editor
The frequency band editor in the upper half of the panel is where you set the width of the frequency
bands as well as the output level. The vertical value scale to the left shows the gain level of each
frequency band. The horizontal scale shows the available frequency range.
• To define the frequency range of the different frequency bands, use the handles at the sides of
each frequency band.
• To attenuate or boost the output level of each frequency band by ±15 dB, use the handles on
top of each frequency band.
Global Settings
SB
Switches between multi band and single band mode.
SCENES
You can save up to 8 different settings. If the default setting of a scene is active, the selected
scene button lights up yellow.
If you change the default settings, the button lights up green, indicating that this scene has
customized settings.
Distortion Plug-ins
8 | VST Rack Pro Plug-in Reference